Equipment's list

1
Spin Coater It is used for the thin film deposition when the material is in liquid form. Usually a small amount of coating material is applied on the center of the substrate, and then rotated at the desired speed.
1
Electrochemical Analyser It is for the measurement of potential, charge, or current to determine an analyte's concentration or to characterize an analyte's chemical reactivity.
1
Stylus Profilometer The purpose of profilometry is to get surface morphology, step heights and surface roughness. Stylus profilometry requires force feedback and physically touching the surface, so while it is extremely sensitive and provides high Z resolution
1
3 Zone Furnace This is used for the oxidation and annealing of the devices in the controlled environment upto 1100˚C. This system is modified to perform Chemical Vapor deposition well.
1
3D Printer 3D printing joins or solidifies polymer under computer control to create a three-dimensional object. These can be used further used for sensor (biological, chemical and physical) applications
1
Electrospinning Electrospinning is a fiber production method which uses electric force to draw charged threads of polymer solutions or polymer melts up to fiber diameters. These fibers further can be used for singe fiber-based devices.
1
Electrical Characterization System is used for electrical characterisation of the devices (including two terminal, three terminal and four terminal devices).
1
Thermal Evaporator This is used for physical Vapour deposition of the material. It is basically based on the principle of heating the material upto its melting point in high vacuum atmosphere.
1
Reactive Ion Etching It is used for dry etching using reactive gas discharge
1
Sputtering System It is used for the solid-state thin film deposition for device fabrication. Two different types of sputtering are available one is RF sputtering and DC sputtering.